2 Which is not a geometry that is considered a foundation fo

2) Which is not a geometry that is considered a foundation for technical graphics? A) Relative B) Descriptive C) Analytic D) Plane 3) ______________ are commonly accepted practices, rules, or methods. A) Standards B) Laws C) Conventions D) Habits 4) Which of the following input devices does not translate hand movements into instructions for the computer? A) Scanner B) Mouse C) Keyboard D) Tablet and puck EGN 1111c- Fall 2015 5) In a VR system, all of the following statements about immersiveness are true, except: A) response time is an important factor B) both display resolution and display size can affect it C) the visual sense is the only sense to affect it D) tracking body movement is an important factor 6) All of the following are part of the refinement process except: A) Modeling B) Design analysis C) Problem identification D) Design visualization 7) Which type of model is likely to be created with a rapid prototyping system? A) Mathematical model B) Wireframe model C) Surface model D) Physical model 8) Which of the following is considered a type of mechanism analysis? A) Functional analysis B) Kinematic analysis C) Finite Element analysis D) Human Factors analysis 9) Which of the following would be used to help determine the spacing between earpiece and mouthpiece on a phone? A) Dynamic analysis B) Kinematic analysis C) Finite Element analysis D) Human Factors analysis EGN 1111c- Fall 2015 10) All of the following are part of the implementation phase, except: A) Modeling B) Documenting C) Servicing D) Marketing 11) Which of the following is the responsibility of the production manager? A) people B) plants C) processes D) all of the above 12) Which of the following would be a typical use for Product Data Management? A) tracking potential clients by Marketing B) generating variations of a preliminary design C) searching for how many designs used a particular fastener D) evaluating the strength of a rib support on a cast piece 13) Which method of analysis takes into account forces acting on the model? A) kinematics B) mass-properties C) dynamics D) process planning 14) Product Lifecycle Management (PLM): A) is a new term for Product Data Management (PDM) B) includes all parts of the company, including marketing and finance C) is the management of phasing a product out of production D) involves all product processes outside of product development EGN 1111c- Fall 2015 Chapter 2 1) Which type of sketch is not a pictorial sketch? A) isometric B) oblique C) multiview D) perspective 2) Which of the items below is typically not a tool used in technical sketching? A) a pencil B) a triangle C) an eraser D) a napkin 3) In a parametric modeling system, relations between sketched entities are defined with: A) constraints B) parameters C) dimetrics D) coordinate input 4) All of the following guidelines are important when making a sketch with a parametric modeling program, except: A) the shape of the sketch is important, not size B) the dimensions used to describe the features should match the design intent. C) geometric constraints of the feature should match the design intent. D) lines should be sketched to their exact, final length. 5) In the ideation phase of a project, highly refined, detailed drawings A) are required for analysis B) assist in rapid prototyping C) impede the exploration of alternative ideas D) simplify the design process. EGN 1111c- Fall 2015 6) In engineering design, the goal of technical sketching is A) simplification B) accuracy C) manufacturing detail D) effective shading 7) When creating a freehand technical sketch, the paper should be A) fixed to the drawing surface with tape B) square or isometric grid paper C) blank white drawing paper D) free to rotate for orienting in the best position for sketching 8) The process of sketching an object by defining its outline is called A) negative space sketching B) contour sketching C) upside down sketching D) symmetrical pattern sketching 9) The first step in sketching objects with irregular rounded shapes and complex features A) layout key center lines and angles B) sketch hidden outlines C) sketch interior details D) start with dimensions and text EGN 1111c- Fall 2015 Chapter 3 1) Which coordinate system uses two angles and one distance? A) world B) spherical C) local D) cylindrical 2) Which coordinate system uses two distances and one angle? A) world B) spherical C) local D) cylindrical 3) If you are going to create a tangent arc between two arcs that cannot intersect, to find the center of the tangent arc you must set your compass to a radius that is: A) the existing arc radius minus the tangent arc radius B) centered at the tangent point of the new arc and the existing arc C) the existing arc radius plus the tangent arc radius D) the sum of the two existing arc radii 4) ________ do not define a plane. A) Two parallel lines B) Three points C) Two skew lines D) A line and a point 5) A(n) ________ subtends an angle which is greater than that of a semicircle A) quadrant B) segment C) secant D) major arc EGN 1111c- Fall 2015 6) What type of curve is created by the intersection of a plane parallel to the side of a cone? A) parabola B) hyperbola C) ellipse D) roulette 7) A(n) ________ is created by the motion of a point on a circle as the circle rolled along a straight line A) epicycloid B) hyperbola C) cycloid D) spiral 8) When making a \'pipe\' with a ruled surface, the _________ determines whether the pipe is straight or curved A) generator B) generatrix C) cutting plane D) directrix 9 The path that a generatrix follows is called the: A) parabola B) b-spline C) ruler D) directrix 10) Another name for a cube is a A) hexahedron B) tetrahedron C) isocohedron D) octahedron EGN 1111c- Fall 2015 11) A(n) ________ cone has two planar surfaces parallel to each other A) truncated B) frustrum C) right D) oblique 12) Which type of surface model construction use a series of Directrix curves to define a surface? A) sweeping B) lofting C) NURBS D) revolving

Solution

Relative is not a geometry that is considered a foundation for a technical graphics it is a term which defines a position with respect to other(something).