Build a Better Thermos Challenge I Challenge problem Design

Build a Better Thermos Challenge I Challenge problem: Design an insulating device that willhold 355 mil (12 fluid ounces) of warm water and keep it warm for the longest time (compared to your peers\' devices). 5 points for having a final thermos Design constraints: 1) Fit in your teacher\'s hand You May. 2) Must hold 355 mL (12 fl oz)of hot water t) Use a cup as the core structurally sound (doesn\'t easily fall apart) 2) Use any raw materialsat home or fromthe 4) No part of your container may be permanently store as long as they obey the \"May NOT altered as result of the final test (your results must be repeatable without changing your You May NOT: 50 Must contain a hole in the id to insenta t0 Useathermostravelmug as the core 2) Use materials onlyaccessible to research 60 The container that showsthe lowest change in laboratory personnel a set amount of time wins! Useatopicaplid that permanently seals the ll. Research the problem: Summarize what you learned from your research. Minimum of one paragraph (at least five complete sentences) 5points Ill. Brainstorm Solutions: Describe (d your initial designideas. Include annotati questions, measurements, sources (where you found theinformation) NOTE: These are just your You will describe your prototype in the next section.5points IV. Build a Prototype: Now that you have selected an idea to begin with, draw your initial design before you begin building. Take your time and put effort into this drawing. It should include clean lines, measurements, labels, at least two perspectives (cut away and top down), materials, and notes. 5 points V. Test the prototype: Congratulations. You have built your first prototype and are ready to begin initial testing. Your initial tests should include the following Size: Will it fit in your teacher\'s hand? Water holding ability. Will your prototype hold 355 ml (12 fl oz.) of water? Structure: Is your prototype build to last? Is it structurally sound? Insulation: Will it keep 355 ml (12 fl oz.) of water wamm for 30 minor longer? Create a data table to display your testing data. Please include a brief description of each test and column/row headings for tables and units for all data. 10 points

Solution

Dear student this problem is research based . So follow the steps

1. Go for the Litrature survey gathere all the data from research papers (30 papers)

2. read and note down what are materials used by the other auther from research paper

3. what are the problem observed by the other auther is nothing but your problem statement

4. Objective of your Project is stated in above question

5. Go for different type of Design of experiment technique

6. if want to optimize it than go for optimal solution

7. go for validation to check your accuracy of mathamatical model.

[PLEASE DO MORE FOCUS ON YOUR LITRATURE RIVIEW]

8. Conclude the result from data observed from experimentation.