You would like to design the high pass filter above that has

You would like to design the high pass filter, above, that has a frequency response shown by the Bode plot below. If R_1 is selected to be R_1 = 100 Ohm you will need to determine the values of R_f and C to complete the design. The design is done in steps. First, determine the corner frequency in rad/sec and the magnitude of the passband gain, K. Enter omega_c in the box below on the first line and |K| on the second line. Recall that a gain in dB is related to the gain by the formula K_dB = 20log_10|K| Enter the value for R_f in Ohms on the first line and the value for C in units mu F on the second line. Omit the units.

Solution

_{Wc= 3000 rad/sec}