Modulated current metal transfer can reduce spatter and asso

Modulated current metal transfer can reduce spatter and associated with conventional GMA welding use 100% CO_2 for all of the weld it makes only use argon and helium as shielding gasses due to the higher deposition rates be used for axial spray or short-circuiting metal transfer method Why would a welder need extra protection for their eyes when making an axial spray weld? To protect the eye from the increased weld spatter. To protect the eye from the increased heat product by axial spray arc welding. The high welding current produces a great deal of UV light. The hot metal can cause infrared light burned to the eye and face. In the feed system, the electrode must have enough strength to be pushed through the conduit kinking. push-type pull-type push-pull-type linear is a series of ridges cut into the groove. Ridging Smoothing Knurling V-grooving GMA welding machines have duty cycle. 20 percent 60 percent 80 percent 100 percent Which metal transfer method occurs as the result of direct contact of the electrode to the molten weld Short-Circuiting transfer Axial spray transfer Globular transfer Buried-arc transfer

Solution

Answer to the questions against the correct option is given below:

22. b

23. d

24. d

25. c

26. a

27. d

28. c

29. a