Complete the experimental procedure Obtain 3D printed specim

Complete the experimental procedure: Obtain 3D printed specimen from lab instructor. ? Load specimen into the apparatus. ? Unpin the pinned end of the arm and let it hang freely. Zero out (set as origin) the displacement indicator. Place the load (mass hanger with loaded masses) on the arm. ? Measure and record the gauge length, thickness, and width. Measure and record 0.219 kg mass weights and place them on the 0.100 kg mass hanger. Record the extension for 25 min. Measure and record the gauge length, thickness, and width. Measure and record 0.219 kg mass weights and place them on the 0.100 kg mass hanger. Remove the load. Measure and record the gauge length, thickness, and width. Measure and record 0.219 kg mass weights and place them on the 0.100 kg mass hanger. Record the extension until failure occurs. Measure the thickness of the sample. Measure and record 0.219 kg mass weights and place them on the 0.100 kg mass hanger. Record the extension until failure occurs.

Solution

2)Measure and record the gauge length,thickness and width.

4Measure and record 0.219 kg mass weights and place them on.100kg mass hanger.

8Record the extension for 25 min.