I need some help translating the following provided pseudo c

I need some help translating the following provided pseudo code into code (using arduino nano connected to an LCD):

// Import LCD Library

#include <LiquidCrystal.h>

// Defines for LCD

LiquidCrystal LcdDriver(11, 9, 5, 6, 7, 8 );int count;
SetUp:    

Start LCD     

clear the display     

zero count

Loop:     

Every 500 milliseconds        

Increment count         

Clear Display         

Display count

*Notice that the first lines are exactly what is needed to interface to the LCD. The pin numbers in thedefinition of LcdDriver are critical and are based on the traces from the schematic.

Solution

LiquidCrystal LcdDriver(11, 9, 5, 6, 7, 8); int minutes = 27; //These global integers keep the value of the clock int sec = 10; int hr = 10; const long interval = 1000; //This interval is equal to 1 second and will be added to seconds unsigned long oldMillis = 0; int count; void setup() { // put your setup code here, to run once: LcdDriver.begin(16, 2); LcdDriver.clear(); LcdDriver.setCursor(0, 0); } void loop() { //LcdDriver.setCursor(0,1); unsigned long currentMillis = millis(); //This sets up the timer so that it can add one second to the integer if(currentMillis - oldMillis >= interval) { oldMillis = currentMillis; sec++; LcdDriver.clear(); LcdDriver.setCursor(0, 0); LcdDriver.print(\" Current Time\"); LcdDriver.setCursor(4, 1); if(hr < 10) { //Prints an extra 0 if hr < 10 LcdDriver.print(0); LcdDriver.print(hr); LcdDriver.print(\":\"); } else { //Print no zero if hours > 10 LcdDriver.print(hr); LcdDriver.print(\":\"); } if(minutes < 10) { //Prints an extra 0 if minutes < 10 LcdDriver.print(0); LcdDriver.print(minutes); LcdDriver.print(\":\"); } else { //Print no zero if minutes > 10 LcdDriver.print(minutes); LcdDriver.print(\":\"); } if(sec < 10) { //Prints an extra 0 if seconds < 10 LcdDriver.print(0); LcdDriver.print(sec); } else { //Print no zero if seconds > 10 LcdDriver.print(sec); } //Adds to minutes whenever seconds is == to 59 if(sec == 59) { minutes++; sec = -1; } //Adds to hours whenever minutes is == to 59 if(minutes == 60) { hr++; minutes = 0; } //Resets the clock whenever hours is == to 23 if(hr == 24) { hr = 0; } } }