PART 3 TRUE OR FALSE 2 Points Each Circle the letter that co

PART 3: TRUE OR FALSE (2 Points Each) Circle the letter that corresponds to the correct answer in each of the following questions. 1. As a rule, all measurem most mistakes and at the same time to improve the precision of the measurement ents are immediately repeated to enable the surveyor to eliminate A sag error is introduced when enough tension is applied to a steel tape laid directly on a road surface. 2. 3. The layouts of proposed property lines and corners as required in land division are called 4· The elevations of temporary benchmarks are not normally published, but they are available in the field notes of various surveying agencies. 5. Large-scale building projects will have horizontal control points established, which are based on a state plane grid or a transverse Mercator grid. 6. Stations are dimensions measured along a baseline with the beginning point described as 7. In surveying, random errors can be minimized but not completely eliminated 8. Inversing the distance is the process of finding the distance between any two points 1 and 9. Compliance with various building codes and legislative requirements is not necessary for 1+00 2 using their rectangular coordinates. obtaining a building permit. A floor plan shows the location of the building on the lot. 10.

Solution

Answer

1- True

2- False

3-True

4-True

5-False

6-True

7-True

8-False

9-False

10-True