Which of the following indicates that a printer it network r

Which of the following indicates that a printer it network ready? An RJ11 jack A USB connector An RJ45 jack An SCS1 connector Which of the following can send data the farthest? Multi-mode fiber Single-mode fiber STP Coaxial What is the most important piece of information needed to connect to a specific wireless network? Channel MAC address SSID Administrator password What are advantages of using the Dynamic Host Configuration Protocol (DHCP)? (Select the two best answers.) IP addresses can be managed from a central location. The network speed can automatically adjust hosed on the type of traffic being generated. The hosts file on the computer can he validated for proper entries. Media access control addresses can be changed. Computers can automatically get new addressing when moved to a different network segment. Which of the following is a valid IPv4 address for a network host? 127.0.0.1 169.254.0.0/16 172.17.58.234 255.10.15.7 Which of the following statements is correct concerning IPv6 addresses? They cannot be used with IPv4. They are supported by all routers. They represent addressing using 128 bits. They require fiber-optic connections. Which of the following best describes a hub? Inspects traffic and accepts or declines transmission Determines the best route to transmit data Broadcasts data to all network devices Broadcasts data to specific network devices If your \"bandwidth\" is 1000 Mbps, how many bits are you sending/receiving? (Select the two best answers.) 100,000,000 bits per minute 1000 bits per second 1,000,000,000 bits per second 1 gigabit per second Which of the following is an example of a broadband connection? Cable Internet Ethernet Client/Server IEEE 802.3 You need to expand the peripherals of a computer, but the system doesn\'t have enough ports. Which type of card should you install? Modem Network adapter USB card TV tuner card Which of the following best describes the differences between a switch and a router? A switch interconnects devices on the same network so that they can communicate, whereas a router interconnects one or more networks. A router broadcasts all data packets that are sent on the network, and a switch transmits data directly to the device. A switch broadcasts all data packets that are sent on the network, and a router transmits data directly to the device. A switch interconnects one or more networks, whereas a router interconnect devices on a network What service or feature is used to prioritize video and VoIP transmissions to reduce jitter? VLAN ether channel port coupling QoS Which of the following IP addresses would a technician see if a computer is connected to a multifunction network device and is attempting to obtain an IP address automatically but is not receiving an IP address from the DHCP server ? 172.16.10.10 192.168.0.10 169.254.10.10 192.168.10.10

Solution

The answer to the 1 st question is An RJ45 jack.

This is mainly used to connect computer with the ethernet based Local area network.

It is mainly a physical interface.