I really need help with making this model on SolidWorks 2016

I really need help with making this model on SolidWorks 2016

A step by step solution would be most appreciated.

3. Cylinder Support Dimensions are in inches.) 45 2.0 RI.25 75 2.25 60 5.25 I. 50 25 1.25 R2.0 2.5

Solution

Follow each every step with image which it will clear the concept

* select front view & draw the diagrm as 7.25 length, 2.5 height & extended upto 4 inch now you added the material which it is a currently complete Block .

*now select top view after following 1st step

Draw a semi circle as 2 inch radius, right side of the isometric digram & use cut out tool & do that part throughly, now the material is removed,& after doing operation .

Draw another semi circle in the midle(consider top view) as radius 1.25 in ,again use cutout tool & do the operation at a particular depth.

now using hole option draw a hole & do the operation with particular depth & dimension.

now again select top view & cut out the extreme part with 60⁰ & 45⁰

now you have the isometric part as given aBove