The relationship between decimal and the 7 segment LEE code

The relationship between decimal and the 7 segment LEE. code S is as shown below. Assume that 10 decimal numbers are stored in a random file called DECIMAL and that the 7 segment codes are stored a file called TABLE. write a program using the XLAT instruction that will go through the DECIMAL file and move the XLAT instruction that will go through the DECIMAL file and move the corresponding 7 segment code to a third file called FILE3. As an example, if the number in the DECIMAL file is 4, then the code 66 is moved to the third file. Stop when the 10 numbers have all been moved. Decimal:0, 1, 2, 3, 4, 5, 6, 7, 8, 9 Table:3FH, 06H, 5BH, 4FH, 66H, 6DH, 7DH, 07H, 7FH, 6FH B. A microprocessor interfacing circuit has the following registers:Status register with address 1000H where this register will have the number 8OH if INPUT data is ready and the number 04H if the OUTPUT device is ready to receive data. Input port with address 0378H and Output port with address 0379H. Write a program that will perform as follows:(l.) Input from the Status register and see if input data is ready. (2.) input the data from the Input port if data is ready otherwise, go back to step 1. (3.) If data has been ready, input receive data. (4.) output the data to the output port if the output device is ready, otherwise, go back to step 3. stop after inputting and outputting 8 pieces of data.

Solution

The microprocessor, also known as the Central Processing Unit (CPU), is the brain of all computers and many household and electronic devices. Multiple microprocessors, working together, are the \"hearts\" of datacenters, super-computers, communications products, and other digital devices. The first microprocessor was the Intel 4004, introduced in 1971. The 4004 was not very powerful; it was primarily used to perform simple mathematical operations in a calculator called “Busicom.” Just like microwaves or telephones, devices with microprocessors have become so integrated into our daily lives, that we cannot imagine a life without them.

It’s sometimes hard to believe that only 60 years ago, computers were rare and were not available for the wider public. It wasn\'t until the \'80s that computers entered our homes and - thanks to the microprocessor - really made an impact on the average person\'s life. Nowadays, modern microprocessors can perform extremely sophisticated operations in areas such as meteorology, aviation, nuclear physics and engineering, and take up much less space as well as delivering superior performance. Over the past 40 years, microprocessors have become faster and more powerful, yet increasingly smaller and more affordable. The manufacturing of a CPU is a highly complex and demanding process involving multiple hundreds of steps in “cleanrooms.” Cleanrooms or manufacturing plants, contain air which is 1,000 times cleaner than a hospital’s operation theater . The building of one plant costs approximately $5bn.