The slot feature of the turning support is to fit to the rai

The slot feature of the turning support is to fit to the rail of the base and be fixed to the base using a 12 mm loose bolt. Figure 9-26 shows the turning support. We like to create the necessary tolerance statements for the fit of the slot and rail as well as a 12 mm loose bolt. The play in the slot and rail fit should not exceed 0.1 mm. The bolt holes are to be drilled.

Solution

Necessary tolerance statement for Slot and Rail : G7/h6 for sliding

Necessary tolerance for 12 mm dia drill hole-: D9h9 for loose location