1. Tell the decision criteria of alternative route selecting? 2. What things will be controlled by the criteria in problem 1? 3. 4. 5. Why route survey have to do public hearing? In the step of route survey preparing, why must to study location of control points between origin and destination? Which map can be used in step of reconnaissance? a. scale 1:50,000 b. scale 1:20,000 c. scale 1:10,000 6. what kind of map is for rock base study on alternative route? 7. Traffic survey will be done in what step of route survey? 8. Cost estimate will be done in what step of route survey? Why? 9. Name the equipment used in preliminary survey? 10. What step of route survey that for surveying of material place, 11. How to make Reference Point (RP) for horizontal control point? 12. What is slope staking? borrow pit, rock source and water source? 13. Tell the min. limit of curve radius(m) for rolling terrain of multilane highway/without controi a 14. Tell the max. super elevation(%) for 2 lanes highway in rural area? 15. Tell definition of sharp curve? 16. What is Broken Back Curve? 17. Compound curve; first curve have radius of 600 m. tell the smaller second curve\'s radius limit? 18. Why the alignment which cross waterway should not have too much skew angle? 19. The rate of super elevation is related to design speed and should not greater than 10 %, calculate the super elevation rate (S.E.) of 80 km/hr design speed and 300 m. radius? 20. Circular curve is need when deflection angle greater than what degree? 21. What situation that should design the extra lane for truck climbing on mountainous highway? 22. What is the characteristics of waterway that should be observed? 23. Tell the leveling crossing error limit for loop misclosure in route survey? 24. A car with 70 kph speed on the level terraln road with friction coefficient-0.39, find the stopping sight distance of the car? to scale) show traffic direction line with correct passing sight distance? station B is 165 degree 30 minute 20 second. Find right angle at station F and D? 25. The 3 km. long two lane highway with 70 km./hr. designed speed and friction 0.45, draw the plan of the road (non 26. To survey for centerline of alignment ABDE with obstacle between 8 and D by Dogleg technique. If right angle at 27. Given coordinates A (x 100.000, y 100.000) and 8 (x-150.000,y 250.000) Find azimuth AB, azimuth BA and distance AB? 28. Find tangent distance of the circular curve with 716 m. radius and 11 m. external distance? 29. Make horizontal curve setting out data table by offset each 20m. from tangent method, given data are 45 degree intersection angle and 220 m. radius ? each 20 m. from chord method, given data are 45 deg 30. Make horizontal curve setting out data table by offset intersection angle and 220 m. radius ? 
(1) Answer:- Decision criteria for alternative route selecting:-
 (i) Optimize alignment
 (ii) Connections
 (iii) Costs
 (iv) Benefits
 (2) Answer:- (i) Community Accessibility
 (ii) Horticulture effect
 (iii) visual impact
 (iv) Noise
 (v) Property
 (3) Answer:- Public hearing is very important in route survey. Because many private properties may be in route. If route is Passing from populated area then public hearing is very necessary.
 (4) Answer:- Location is very important in route selection. Location should result in minimum interference to agriculture and industry.Location should as for as possible facilitate easy grades and curvature.
 (5) Answer:- Topographical maps
 (6) Answer:- Geological maps
 (7)Answer:- Reconnaissance survey
 (8) Answer:- Preliminary survey.
 To determine for greater accuracy the cost of estimation done in preliminary survey.
 (9) Answer:- Theodolite
 (10) Answer:- Detailed survey